Engineering Management Degree Requirements

The department of Engineering Management, in conjunction with its various constituencies, has clearly-defined program objectives consistent with Gonzaga University's mission statement.

B.S. in Engineering Management: 133-137 Credits

Total credit number depends on student's selection of discipline track.

First Year, Fall

CHEM 101 General Chemistry I 3 credits
CHEM 101L General Chemistry I Lab 1 credit  
ENSC 191 Engineering First-Year Seminar I 3 credits
MATH 157 Calculus and Analytical Geometry I 4 credits
PHIL 101 Reasoning 3 credits
Core Broadening Requirement 3 credits

First Year, Spring

ENSC 192 Engineering First-Year Seminar II 3 credits
ENSC 205 Statics 3 credits
MATH 258 Calculus and Analytical Geometry II 4 credits
PHYS 103 Scientific Physics I 4 credits
PHYS 103L Scientific Physics I Lab 1 credit  
PHIL 201 Philosophy of Human Nature 3 credits

Second Year, Fall

ECON 200 Economic Analysis 3 credits
MATH 259 Calculus and Analytical Geometry III 4 credits
PHYS 204 Scientific Physics II 4 credits
PHYS 204L Scientific Physics II Lab 1 credit  
MENG 221 Materials Engineering 3 credits
EENG 201 Circuit Analysis I 3 credits
EENG 201L Circuit Analysis I Lab 1 credit  

Second Year, Spring

ENSC 244 Computer Methods for Engineers 3 credits
ENSC 306 Dynamics 3 credits
ENSC 355 Thermal Science
CE Track students take ENSC 352 Fluid Mechanics
3 credits
MATH 260 Ordinary Differential Equations 3 credits
Track Course No. 1 3-4 credits
RELI --- Christianity/Catholic Traditions 3 credits

Third Year, Fall

BMIS 235 Management Information Systems 3 credits
MATH 321 Statistics for Experimentalists 3 credits
Track Course No. 2 3 credits
Core Ethics Requirement 3 credits
RELI --- World/Comparative Religions 3 credits

Third Year, Spring

ACCT 263 Accounting Analysis 3 credits
CENG 303 Environmental Engineering 3 credits
OPER 340 Operations Management 3 credits
Core Integration Seminar 3 credits
Track Course No. 3 3-4 credits
Track Course No. 4 0-3 credits

Fourth Year, Fall

ENSC 405 Engineering Project Management 3 credits
ENSC 491 Senior Design Project 2 credits
MGMT 350 Principles of Management 3 credits
Core Broadening Requirement 3 credits
Track Course No. 5 3-4 credits
Track Course No. 6 0-3 credits

Fourth Year, Spring

BFIN 320 Principles of Finance 3 credits
ENSC 400 Fundamentals of Engineering Exam
Must also take WA Fundamentals of Engineering Examination
0 credits
ENSC 492 Senior Design Project II 3 credits
MKTG 310 Principles of Marketing 6 credits
Track Course No. 7 3-4 credits
Track Course No. 8 0-4 credits

Engineering and Computer Science Tracks

Students select one of the following tracks and take all courses in prescribed order. Occasionally a track has no course required for a particular slot.

Civil Engineering Track: 23 credits

  1. ENSC 301 Mechanics of Materials I, 3 credits
  2. CENG 331/331L Soil Mechanics, 4 credits
  3. CENG 318 Transportation Engineering, 3 credits
  4. No course required
  5. CENG 301 Structural Analysis I, 3 credits
  6. CENG 473 Foundation Design, 3 credits
  7. CENG 412 Concrete Design, 3 credits
  8. CENG 352/325L Hydraulic Engineering and Lab, 4 credits

Computer Engineering Track: 22 credits

  1. CPSC 121 Computer Science I, 3 credits
  2. CPEN 230/230L Introduction to Digital Logic, 4 credits
  3. CPEN 231/231L Microcomputer Architecture and Assembly Programming and Lab, 4 credits
  4. EENG 391 Engineering Design, 1 credit
  5. CPEN 430/430L Digital System Design and Lab, 4 credits
  6. CPEN 436 Biomedical Informatics and Computing, 3 credits
  7. CPEN 435 Parallel Computing, 3 credits
  8. No course required

Electrical Engineering Track: 22 credits

  1. EENG 202 Circuit Analysis II, 3 credits
  2. EENG 303/303L Electronics Design I and Lab or EENG 311 Signals and Systems, 4 credits
  3. EENG 340/340L Introduction to Electric Power Engineering, 4 credits
  4. EENG 391 Engineering Design, 1 credit
  5. EENG 303/303L Electronics Design I and Lab or EENG 311 Signals and Systems, 4 credits
  6. EENG 4xx Technical Elective, 3 credits
  7. EENG 304/304L Electronics Design II and Lab, 4 credits
  8. No course required

Mechanical Engineering Track: 21 credits

  1. ENSC 301 Mechanics of Materials I, 3 credits
  2. MENG 291/291L Introduction to Mechanical Engineering Design and Lab, 3credits
  3. MENG 301/301L Manufacturing Processes and Lab, 3 credits
  4. ENSC 481 Quality Management, 3 credits
  5. MENG 456 Design for Manufacturability, 3 credits
  6. No course required
  7. MENG 330 Machine Design, 3 credits
  8. MENG 447 Material Selection for Design, 3 credits

Computer Science Track: 24 credits

  1. CPSC 121 Computer Science I, 3 credits
  2. CPSC 122 Computer Science II, 3 credits
  3. MATH 231 Discrete Structures, 3 credits
  4. CPSC 224 Object-Oriented and Event-Driven Programming, 3 credits
  5. CPSC 223 Algorithms and Abstract Data Structures, 3 credits
  6. CSPC Technical Elective, 3 credits
  7. CSPC Technical Elective, 3 credits
  8. CSPC Technical Elective, 3 credits